SMOOTMAX FN
Using SMOOTMAX FN imparts good softness and pliability to fabrics.
This product is especially important during coating process where anionic chemicals are used.
SMOOTMAX FN has virtually no effect on shade and light fastness of dyeing and prints and is the best suited for white goods.
| Typical properties | |
| Appearance: | Off-White to pale yellow flakes |
| Nature | Non-ionic fatty acid derivative |
| PH (1:10 solution) | 8 ± 0.5 |
| Acid value: | Max 15 |
| Solubility | Dispersible in warm water 60°C |
| Melting point: | 55 ± 3 °C |
| Stability: | Stable to hard water (700 ppm) |
| Packing: | 25 Kg PE bags |
| Storage Condition | Store in cool and ventilated warehouse. Take care of heavy pressure to prevent agglomeration. |
APPLICATION
SMOOTMAX FN can be applied both by exhaustion as well as padding techniques.
SMOOTMAX FN can be used as softener and body filling agent for cotton and
synthetic fabrics along with their blends.
This product is compatible with all types of additives in textile finishing.
Preparation of 20 % paste from concentrate
1. Take 20 kg of FLASTOSOFT FNZ Concentrate.
2. Add 80 kg warm water (58 - 60°C)
3. Mix well with stirrer till the concentrate is fully dispersed in water.
4. Cool down the paste to obtain ready non-ionic softener white paste.
Note
According to our best knowledge and technical experiments, the above data is true and accurate. Regarding to variety of consumption procedures, it is recommended to evaluate the information before use.